Magnetic Manual Keying

A very reliable and practical way to add velocity keying to any organ keyboard. The kit provides a keying strip with magnetic sensors and the magnets to mount on each key. Standard length 61 notes - can be special ordered to create any keyboard length from 21 notes up to 88 notes.

Magnetic Pedal Keying

Everything needed to install magnetic keying contacts on a pedal board. The pedal board contacts use magnets to sense when the pedal is pressed down. The depth can be set easily upon installation by sliding the circuit board up or down and watching the LED indicator on each sensor board. This kit comes with 32 pedal board sensors and 32 magnet assembles for mounting to the pedals.

Thumb Piston

A very reliable hall-effect (contactless) thumb piston with a concave surface and curved edge in the AEolian-Skinner® style. Available in white, red, black, or yellow, with a standard black or optional green surround. The piston can be configured for either positive or negative switch output and positive or negative light input. The LED back light mimics the warm color of an incandescent bulb. Custom engraving is available for all piston buttons.

Smart Thumb Piston

Nearly identical to the standard thumb piston, but designed for use with WTC Smart Chain. All colors and engraving options are available

Headphone Interface WTC-290

Headphone interface for use with the WTC-303 Console Controller. Includes a headphone jack with insertion detection and a volume knob.

User Interface Screen

A small black and white screen which displays information and interfaces with the WTC Console Controller. This screen is required to use the Console Controller.

Smart Expression/Crescendo Bargraph WTC-319

A 10-LED bargraph board to be used either horizontally or vertically in a group. Available with either all yellow LED’s or with eight green and two red LED’s, for use as a Crescendo/Tutti indicator.

Smart 7-Segment Display WTC-320

A 7-segment red LED numerical display. It can be configured to have 1-4 digits, stands ¾” high and is up to 2 inches long when configured for 4 digits.


our facility

5118 Route 309
Center Valley, PA 18034
610.966.2515


hours of operation

Business
M-F 8:30-5:30
Service
24/7


help

FAQ
Contact Us
Downloads