Crome Breaker
This is a current-over-time breaker. It will pass large amounts of current for a settable period of time. This can allow a large bank of stop actions to move, while protecting the electrical system from a short in the wiring or any situation that sustains the current for more time than has been set.
Crome Battery Charger
This is a variable voltage battery charger.
Pipe Computer WTC-329
A high-speed pipe data computer, designed to process all pipe data and send that information to the Pipe Organ Interface boxes. It supports as many as 12 POI boxes and has a WTC voicing port for PC updates and a USB port for updates. This is a direct replacement and upgrade from a WTC-229.
Pipe Organ Interface (POI) Box
The mounting point for output drivers, this box can mount as many as six 85-output pipe drivers and be used with any mix of output drivers simultaneously. The box itself is a hand-crafted, furniture-grade walnut enclosure, designed to look attractive in any high-end pipe chamber.
Positive Output Driver WTC-282
An 85-output high current pipe driver colored red. All outputs are software driven and can be configured to drive any magnet requiring a positive output for activation. This runs off the organ rectifier wired to the POI box.
Negative Output Driver WTC-233
An 85-output high current pipe driver colored black. All outputs are software driven and can be configured to drive any magnet requiring a negative output for activation. This runs off the organ rectifier wired to the POI box.
AC Output Chime Driver WTC-240
A 32-high current pipe output driver colored blue. All outputs are software driven and can be configured to drive any magnet requiring an AC output for activation. This runs off the organ rectifier wired to the POI box, but the AC current being used must be wired directly to this output driver.
WTC to Peterson Data Converter WTC-281
Converts a classic serial stream into 12 legacy Peterson serial streams. The WTC 329 can create a classic serial stream to work with this converter.
Peterson to WTC Data Converter WTC-281
This converts up to 12 legacy Peterson pipe driver streams into a classic data stream. The uPOET and POET can natively read in this classic stream and this converter allows them to read in Peterson streams without having to wire up discrete inputs.
Magnetic Pedal Keying
Everything needed to install magnetic keying contacts on a pedal board. The pedal board contacts use magnets to sense when the pedal is pressed down. The depth can be set easily upon installation by sliding the circuit board up or down and watching the LED indicator on each sensor board. This kit comes with 32 pedal board sensors and 32 magnet assembles for mounting to the pedals.
Keying Controller WTC-324
A stand-alone device for WTC’s proven magnetic keying system. With three different output keying options, it is compatible with all known console control systems and supports up to 8 keyboards. The user interface screen provides setup, diagnostics and setting adjustability, including keyboard length, velocity map, and depth of the on point, off point, and second touch on point. The controller sends keying information via MIDI, WTC Pipe Data, or discrete high-current outputs via a POI Box
Includes controller (316-000324-080) and remote-control set-up device (316-000308-9XX). Can be sold without remote control for customers who already have one.
Smart Expression/Crescendo Bargraph WTC-319
A 10-LED bargraph board to be used either horizontally or vertically in a group. Available with either all yellow LED’s or with eight green and two red LED’s, for use as a Crescendo/Tutti indicator.
Smart 7-Segment Display WTC-320
A 7-segment red LED numerical display. It can be configured to have 1-4 digits, stands ¾” high and is up to 2 inches long when configured for 4 digits.
Smart 73 Input Encoder WTC-323
An input board for keying, piston, or toe stud inputs. The inputs can be either positive or negative common, selected by a jumper. The input functionality is configured by the control system.
Smart 4 Input/Output Dimmer WTC-393
A small 4 I/O board, capable of PWM (pulse width modulated) outputs. When used with the WTC-303 Console controller this board can control up to 4 LED lights. The inputs and outputs are completely software configurable.
Smart SAM Driver
A small driver board to plug directly onto the back of a Syndyne SAM. This board moves the action intelligently and reports back to the controller the current state of the control.
Smart Drawknob Driver
A small driver board to plug directly onto the back of a Syndyne mechanism. This board moves the action intelligently and reports back to the controller the current state of the control.
Data Chain Converter WTC-280
This converter will convert legacy WTC data chains (Data, Clk, Stb) into the smart chain. This allows for systems that are using the legacy chain to add new smart controls. This same converter will convert in the opposite direction, allowing systems that use the Smart Chain to use legacy devices.
Long distance PAL Transceiver
This is a long-distance digital audio transceiver. This model has 4 analog inputs and 4 analog outputs and provides a relay output to turn on an amplifier. This model uses PAL over Cat5e (750 Variant) or Fiber can be selected (250 Variant).
Long distance PAL Receiver
This is a long-distance digital audio receiver. This model has 8 analog audio output channels and provides for a relay output to turn on an amplifier and uses PAL over Cat5e(850 Variant) or Fiber(350 Variant).
Long distance PAL Transmitter
This is a long-distance digital audio transmitter. This model has 8 analog audio input channels and uses PAL over Cat5e(950 Variant) or Fiber(450 Variant).
SATA to PAL adapter
This adapter can be mounted on the back of a POET to convert the short-range PAL over SATA to a long-distance PAL over Cat5e. This adapter supports either 8 Channel input/output or 16 Channel output.
4 Input 1 Output PAL Hub
This hub allows for up to 4 PAL Cat5e input ports to be connected to 1 Cat5e PAL destination port. This can be used to give up to 4 possible connection points for a PAL source. Only one connection can be used at any time, but all 4 can be wired to different locations in a building for convenient connection points. The board supports up to 16 channels of Audio in each direction.
PAL/RS485 to Fiber WTC-346
This is a transceiver that can be used to send PAL or RS485 (ie. Pipe Data) over a fiber optic connection.