61 Input Encoder 122 Output Decoder WTC-215
An input/output board for stop-action controls. It provides an input for the switch and two outputs for the ON and OFF coil of each control. The inputs can be used independently from the outputs, and the outputs can be used for purposes other than driving coils. The inputs are negative common and the outputs drive low. The outputs are fully protected from shorts and over-current situations, with diagnostic LED’s to indicate the current state of the board. The input and output functionality is configured by the control system.
61 Input Encoder 122 Output Decoder WTC-265
An input/output board for stop-action controls. It provides an input for the switch and two outputs for the ON and OFF coil of each control. The inputs can be used independently from the outputs, and the outputs can be used for purposes other than driving coils. The inputs are positive or negative common and the outputs drive low or high, both are selected by a jumper. The outputs are fully protected from shorts and over-current situations, with diagnostic LED’s to indicate the current state of the board. The input and output functionality is configured by the control system.
122 Input Encoder WTC-223
An input board for keying, piston, or toe stud inputs. The inputs can be either positive or negative common, set with a jumper. The input functionality is configured by the control system.
Smart 73 Input Encoder WTC-323
An input board for keying, piston, or toe stud inputs. The inputs can be either positive or negative common, selected by a jumper. The input functionality is configured by the control system.
Smart 4 Input/Output Dimmer WTC-393
A small 4 I/O board, capable of PWM (pulse width modulated) outputs. When used with the WTC-303 Console controller this board can control up to 4 LED lights. The inputs and outputs are completely software configurable.