Amplifier Power Sequencer WTC-52
This is a low voltage power on sequencer. When 12V is supplied to the input, each of the 4 outputs is time delayed on so that total inrush current of each device it controls does not exceed the AC circuit limit.
Piston Lamp Regulator WTC-70
This is a voltage regulator specifically designed for incandescent piston buttons. 12V DC rectifier voltage can be connected and an output between an adjustable 4.5 to 4.8 volts will be supplied on the output terminals.
High Current Lamp Regulator WTC-71
This is a voltage regulator specifically designed for incandescent bulbs. 14-20V DC rectifier voltage can be connected and an output of an adjustable voltage between 6-12V will be supplied to the output terminals. The maximum current is 6A.
Smart Power Distribution WTC-92
This is a power distribution board for use with Walker Smart controls. This board takes care of fusing all of the power links and distributing the Data to each Smart Device group. The fuses are automatically resettable and there is a diagnostic LED for each one of the 6 outputs, alerting to the fuse being open.
Pipe Computer WTC-329
A high-speed pipe data computer, designed to process all pipe data and send that information to the Pipe Organ Interface boxes. It supports as many as 12 POI boxes and has a WTC voicing port for PC updates and a USB port for updates. This is a direct replacement and upgrade from a WTC-229.
Peterson to WTC Data Converter WTC-281
This converts up to 12 legacy Peterson pipe driver streams into a classic data stream. The uPOET and POET can natively read in this classic stream and this converter allows them to read in Peterson streams without having to wire up discrete inputs.
Keying Controller WTC-324
A stand-alone device for WTC’s proven magnetic keying system. With three different output keying options, it is compatible with all known console control systems and supports up to 8 keyboards. The user interface screen provides setup, diagnostics and setting adjustability, including keyboard length, velocity map, and depth of the on point, off point, and second touch on point. The controller sends keying information via MIDI, WTC Pipe Data, or discrete high-current outputs via a POI Box
Includes controller (316-000324-080) and remote-control set-up device (316-000308-9XX). Can be sold without remote control for customers who already have one.
Magnetic Tracker Touch Kit
Everything needed to add Tracker Touch to a standard keyboard. The kit provides a steel bar with two effect settings, a ful set of magnets for the keys and mounting screws.
LED pedal board light
LED light strip pedal board light, which produces evenly distributed lighting along the entire pedal board. The wooden strip is designed to mount on the bottom of the key desk, runs on 12V DC, and is dimmable with a PWM output.
Long distance PAL Transceiver
This is a long-distance digital audio transceiver. This model has 4 analog inputs and 4 analog outputs and provides a relay output to turn on an amplifier. This model uses PAL over Cat5e (750 Variant) or Fiber can be selected (250 Variant).
Long distance PAL Receiver
This is a long-distance digital audio receiver. This model has 8 analog audio output channels and provides for a relay output to turn on an amplifier and uses PAL over Cat5e(850 Variant) or Fiber(350 Variant).
Long distance PAL Transmitter
This is a long-distance digital audio transmitter. This model has 8 analog audio input channels and uses PAL over Cat5e(950 Variant) or Fiber(450 Variant).
SATA to PAL adapter
This adapter can be mounted on the back of a POET to convert the short-range PAL over SATA to a long-distance PAL over Cat5e. This adapter supports either 8 Channel input/output or 16 Channel output.
4 Input 1 Output PAL Hub
This hub allows for up to 4 PAL Cat5e input ports to be connected to 1 Cat5e PAL destination port. This can be used to give up to 4 possible connection points for a PAL source. Only one connection can be used at any time, but all 4 can be wired to different locations in a building for convenient connection points. The board supports up to 16 channels of Audio in each direction.
PAL/RS485 to Fiber WTC-346
This is a transceiver that can be used to send PAL or RS485 (ie. Pipe Data) over a fiber optic connection.